In daily work, how to maintain the copper bar bending machine to extend its life? Here the editor will briefly introduce to you the care and maintenance of the copper bar bending machine
First, the copper bar bending machine When bending raw materials, be sure to align the center of the raw material to be bent with the scale on the copper bar bending machine. If the bending operation is started without alignment, the bending accuracy will be seriously affected. Secondly, When the copper bar bending machine is doing bending work on some special materials, it is necessary to know what the maximum bending angle of the material is, because the maximum angle of many materials is, if it exceeds this angle, the material will be damaged, making the material very easy to bend. At the end of the break, when the copper bar bending machine has completed a series of bending operations, check whether the copper bar bending machine's cutter head is distorted. If it is bent, it should be adjusted in time or replaced with a new one
In addition to work, in life Also pay attention to the following points
Hydraulic oil circuits should check the oil level of the oil tank every week, and should also check after maintenance of the hydraulic system. If the oil level is lower than the oil window, hydraulic oil should be added every time the oil is changed, and the oil tank system should be cleaned. The oil temperature should be between ℃ and ℃
. The filter should be replaced or thoroughly cleaned every time the oil is changed. If the machine tool has relevant alarms or other filter abnormalities such as unclean oil quality, the air on the oil tank should be replaced. Filters should be inspected and cleaned every three months, preferably replaced every year
Hydraulic components Clean hydraulic components every month to prevent dirt from entering the system. Cleaners cannot be used. After using the new machine for one month, check the bends of each oil pipe. If there is any abnormality, it should be replaced. After two months of use, the connections of all accessories should be tightened. When doing this work, the machine should be shut down and the system should be pressure-free
The above is the introduction of the copper bar bending machine Maintenance measures are introduced, I hope it will be helpful to you. The company strictly controls all aspects and the whole process, focuses on performance management, and satisfies customers with first-class product quality and all-round services. It insists on quality first, users first and believes in professional technology. and service will bring you credibility and development, and achieve a win-win situation for each other. We look forward to your cooperation
News